Roof Anchor Accessory – Inverted Flashing with Heat-shrink collar
- Flashing is an indispensable roofing accessory. It seals joints wherever the membrane is penetrated by a roof anchor.
- With inverted roofing systems, the roofing membrane is placed under the insulation sitting on the roof slab or deck.
- The Pro-Bel inverted flashing is designed to maintain a water-tight seal around the safety roof anchors, keeping the integrity of the roof intact.
Download the Permanent Roof Anchor Brochure to review specifications, load ratings, and installation details.
Product size variations are listed below.
For project-specific guidance or system design support, contact our team.
Description
Product Size Chart
Below is a chart of our standard sizes. More are available upon enquiry.
| Model No. | Roof membrane Type | Height | Fit Over Tube Size | Fit Base Plate Size (Max.) |
| EF-P-FL07-IN16 | Inverted | 16″ | 3-1/2″ | 8″ x 8″ |
| EF-P-FL07-IN16A | Inverted | 16″ | 3-1/2″ | 12″ x 12″ |
| P-FL07-IN08 | Inverted | 8″ | 3-1/2″ | 8″ x 8″ |
| P-FL07-IN08A | Inverted | 8″ | 3-1/2″ | 12″ x 12″ |
| P-FL07-IN11 | Inverted | 11″ | 3-1/2″ | 8″ x 8″ |
| P-FL07-IN11A | Inverted | 11″ | 3-1/2″ | 12″ x 12″ |
| P-FL08-IN08A | Inverted | 8″ | 4″ | 12″ x 12″ |
| P-FL08-IN11 | Inverted | 11″ | 4″ | 8″ x 8″ |
| P-FL08-IN11A | Inverted | 11″ | 4″ | 12″ x 12″ |
| P-FL09-IN11 | Inverted | 11″ | 4-1/2″ | 8″ x 8″ |
