Wall Anchor – Adhesive
The Adhesive Wall Anchor provides a permanent fall protection anchorage solution for vertical concrete surfaces where rear access is not available. Designed for retrofit applications, this wall-mounted anchor allows fall protection systems to be added to existing structures without the need for through-bolting or access to the opposite side of the wall.
Download our Safety and Tie Back Anchors Brochure for more information.
See Product Size Variations below.
For further inquiry on this product, please contact us at 1 (800) 461 0575
Description
Features
- Adhesive-mounted wall anchor designed for reinforced concrete structures
- Suitable for retrofit installations where rear wall access is not available
- Stainless steel U-bar configurable to straight, 45°, or 90° orientations
- Intended for parapet and wall-mounted fall protection applications
- Minimum embedment depth of 5″, Minimum reinforced concrete wall thickness of 6″
- Designed for permanent fall protection anchor installations
Compliance
This product meets the following regional compliance standards
Product Size Chart
Below is a chart of our standard sizes. More are available upon enquiry.
| Model No. | Wall Thickness Min. | Embed Depth | U-Bar angle | Region | Adhesive Inserts | Epoxy Type |
| FA-PB48S-2S1 | 6″ | 5″ | 0 | USA | 2 | HY-200A 2 part epoxy |
| FA-PB48S-3S | 6″ | 5″ | 0 | British Columbia | 3 | HVU Glue Capsule |
| FA-PB48S-4S | 6″ | 5″ | 0 | Ontario/Canada | 4 | HVU Glue Capsule |
| FA-PB48S45-2S1 | 6″ | 5″ | 45 | USA | 2 | HY-200A 2 part epoxy |
| FA-PB48S45-3S | 6″ | 5″ | 45 | British Columbia | 3 | HVU Glue Capsule |
| FA-PB48S45-4S | 6″ | 5″ | 45 | Ontario/Canada | 4 | HVU Glue Capsule |
| FA-PB48S90-2S1 | 6″ | 5″ | 90 | USA | 2 | HY-200A 2 part epoxy |
| FA-PB48S90-3S | 6″ | 5″ | 90 | British Columbia | 3 | HVU Glue Capsule |
| FA-PB48S90-4S | 6″ | 5″ | 90 | Ontario/Canada | 4 | HVU Glue Capsule |
| FA-PBC48S-33-B2S | 7″ | 5″ | 0 | California | 2 | HY-200A 2 part epoxy |
