Roof Anchor – Adhesive – Recessed
Designed for finished rooftops where appearance matters, the Recessed Adhesive Roof Anchor provides permanent fall protection while maintaining a low-profile presence. Its recessed design allows the anchor to integrate cleanly into roof terraces and similar applications without disrupting the finished surface.
This adhesive-mounted anchor is designed for retrofit use on existing concrete structures, providing a secure, permanent tie-off solution for rooftop maintenance and access.
As with all adhesive anchors, it is intended for use with load-tested, reinforced concrete slabs of at least 6″ thickness to meet embedment requirements.
Download the permanent roof anchor specification sheet for detailed technical information, including load ratings, materials, and compliance standards.
View available size and configuration options in the Product Variations section below.
For pricing, technical questions, or project requirements, please contact us at 1 (800) 461 0575
Description
Features
- Adhesive-mounted for retrofit installation on reinforced concrete roofs and terraces
- Available in straight, 45°, and 90° configurations for flexible placement options
- Anchors consist of a Stainless Steel Base Plate, Stainless Steel adhesive Studs, complete with a stainless steel U-Bar
- Suitable for installations under pavers for a seamless rooftop appearance
- Engineered for use in adhered roofing with built-up materials not exceeding 4″ thickness
- Ideal for maintenance access and permanent fall protection tie-off points
- Meets OSHA, ANSI, and CSA fall protection compliance when installed per guidelines
- Does not require opening and closing ceilings below for installation. Installed entirely from above
Compliance
This product meets the following regional compliance standards
Product Size Chart
Below is a chart of our standard sizes. More are available upon enquiry.
| Model No. | Slab Thickness Min. | U-Bar Orientation | Embed Depth | Add Ins | Region | Epoxy Type |
| EF-FA-PB48S-B4S1-02 | 6″ | Straight | 5″ | None | USA | HY-200A 2 part epoxy |
| FA-PB48S-B4S | 6″ | straight | 5″ | None | Ontario/Canada | HVU Glue Capsule |
| FA-PB48S-B4S-C | 6″ | straight | 5″ | Cover Plate | Ontario/Canada | HVU Glue Capsule |
| FA-PB48S-B4S1 | 6″ | straight | 5″ | None | USA | HY-200A 2 part epoxy |
| FA-PB48S-B4S1-C | 6″ | straight | 5″ | Cover Plate | USA | HY-200A 2 part epoxy |
| FA-PB48S45-B4S | 6″ | 45 Degree | 5″ | None | Ontario/Canada | HVU Glue Capsule |
| FA-PB48S45-B4S-C | 6″ | 45 Degree | 5″ | Cover Plate | Ontario/Canada | HVU Glue Capsule |
| FA-PB48S45-B4S1 | 6″ | 45 Degree | 5″ | None | USA | HY-200A 2 part epoxy |
| FA-PB48S45-B4S1-C | 6″ | 45 Degree | 5″ | Cover Plate | USA | HY-200A 2 part epoxy |
| FA-PB48S90-B4S | 6″ | 90 Degree | 5″ | None | Ontario/Canada | HVU Glue Capsule |
| FA-PB48S90-B4S-C | 6″ | 90 Degree | 5″ | Cover Plate | Ontario/Canada | HVU Glue Capsule |
| FA-PB48S90-B4S1 | 6″ | 90 Degree | 5″ | None | USA | HY-200A 2 part epoxy |
| FA-PB48S90-B4S1-C | 6″ | 90 Degree | 5″ | Cover Plate | USA | HY-200A 2 part epoxy |
