Roof Anchor – Bolt Through

• The standard height of a four-stud bolt through roof anchor is 18 inches.
• This anchor comes complete with four (4×4) back plates.
• The anchor suits all 3-1/2 & 4 inches flashings depending on anchor height.
• Use conventional/ flat flashings for conventional roof membranes where the insulation is more than 2-1/2 inches and inverted/bell-shaped flashings for inverted roof membranes.
• This anchor is also available in 12 and 15 inches, and up to 24 inches tall with a bigger sized anchor tube and base plate.
• Typically, these anchors are used as end anchors or corner supports with a double lanyard horizontal lifeline.
• With bolt through roof anchors, the designers must consider accessibility to the underside of the slab.
• Look for drop ceilings; avoid drywall and plaster ceilings; be aware of hallways, tall ceiling conditions and conduit.

Download our Safety and Tie Back Anchors Brochure here for more information.

See Product Size Variations below.

For further inquiry on this product, please contact us at 1800 461.0575