Roof Anchor – Cast-in-Cage

  • The standard height of a cast in cage roof anchor is 18 inches.
  • The cage is cast into the concrete and the anchor base is installed during roofing.
  • Inverted/bell-shaped flashing must be used.
  • Generally only used when a standard cast in place roof anchor is not in stock and is not readily available.
  • To meet the scheduled concrete pour, the stainless cage can be made up quickly and sent to the site.
  • This anchor is much more expensive than a standard cast in place roof anchor.
  • The maximum height of this 3-1/2 inch anchor is limited to 18 inches.
  • The minimum Concrete Slab thickness is 6 inches.

Download our permanent roof anchor here for more information.

See Product Size Variations below.

For further inquiry on this product, please contact us at 1 (800) 461 0575

Description

Product Size Chart

Below is a chart of our standard sizes. More are available upon enquiry.

Model No. Anchor Height Slab Thickness Min. Embed Depth Min. Add Ins Flashing Type Flashing Height
FA-PBE79-00A4-1206S 12″ 6″ 5-1/4″ None
FA-PBE79-00A4-1206S-FL1 12″ 6″ 5-1/4″ Flashing Conventional 8″
FA-PBE79-00A4-1206S-FL6 12″ 6″ 5-1/4″ Flashing Inverted 8″
FA-PBE79-00A4-1506S 15″ 6″ 5-1/4″ None
FA-PBE79-00A4-1506S-FL1 15″ 6″ 5-1/4″ Flashing Conventional 8″
FA-PBE79-00A4-1506S-FL6 15″ 6″ 5-1/4″ Flashing Inverted 8″
FA-PBE79-00A4-1806S 18″ 6″ 5-1/4″ None
FA-PBE79-00A4-1806S-FL1 18″ 6″ 5-1/4″ Flashing Conventional 8″
FA-PBE79-00A4-1806S-FL2 18″ 6″ 5-1/4″ Flashing Conventional 11″
FA-PBE79-00A4-1806S-FL6 18″ 6″ 5-1/4″ Flashing Inverted 8″
FA-PBE79-00A4-1806S-FL7 18″ 6″ 5-1/4″ Flashing Inverted 11″