Roof Anchor – Adhesive
- The slab thickness must be at least 6 inches thick in order to have the minimum stud embedment depth of 5″ with the use of (HILTI) HIT-HY 200-A adhesive
Download our Safety and Tie Back Anchors Brochure here for more information.
See Product Size Variations below.
For further inquiry on this product, please contact us at 1800 461.0575
Description
Product Size Chart
Below is a chart of our standard sizes. More are available upon enquiry.
Model No. | Anchor Height | Slab Thickness Min. | Embed Depth Min. | Add Ins | Flashing Type | Flashing Height | Epoxy Type |
FA-PBE78-00A4-1205S1 | 12″ | 6″ | 5″ | None | HY-200A 2 part epoxy | ||
FA-PBE78-00A4-1205S1-FL1 | 12″ | 6″ | 5″ | Flashing | conventional | 8″ | HY-200A 2 part epoxy |
FA-PBE78-00A4-1205S1-FL6 | 12″ | 6″ | 5″ | Flashing | inverted | 8″ | HY-200A 2 part epoxy |
EF-FA-PBE78-00HH4K-150312S1 | 15″ | 4″ | 3-1/2″ | None | HY-200A 2 part epoxy | ||
EF-FA-PBE78-00U4-150334S1 | 15″ | 5″ | 3-3/4″ | None | HY-200A 2 part epoxy | ||
FA-PBE78-00A4-1505S1 | 15″ | 6″ | 5″ | None | HY-200A 2 part epoxy | ||
FA-PBE78-00A4-1505S1-FL1 | 15″ | 6″ | 5″ | Flashing | conventional | 8″ | HY-200A 2 part epoxy |
FA-PBE78-00A4-1505S1-FL6 | 15″ | 6″ | 5″ | Flashing | inverted | 8″ | HY-200A 2 part epoxy |
EF-FA-PBE78-00U4-1804S1 | 18″ | 5″ | 4″ | None | HY-200A 2 part epoxy | ||
FA-PBE78-00A4-1805S1 | 18″ | 6″ | 5″ | None | HY-200A 2 part epoxy | ||
FA-PBE78-00A4-1805S1-FL1 | 18″ | 6″ | 5″ | Flashing | conventional | 8″ | HY-200A 2 part epoxy |
FA-PBE78-00A4-1805S1-FL2 | 18″ | 6″ | 5″ | Flashing | conventional | 11″ | HY-200A 2 part epoxy |
FA-PBE78-00A4-1805S1-FL6 | 18″ | 6″ | 5″ | Flashing | inverted | 8″ | HY-200A 2 part epoxy |
FA-PBE78-00A4-1805S1-FL7 | 18″ | 6″ | 5″ | Flashing | inverted | 11″ | HY-200A 2 part epoxy |