Wall Anchor – Adhesive with HSS Reinforcing

The Adhesive Wall Anchor with HSS Reinforcing is a permanent fall protection anchorage solution designed for wall installations requiring additional structural reinforcement. This anchor is intended for retrofit applications where access to the underside of the roof or concrete slab is not available, making it suitable for upgrading fall protection on existing structures

Download the Permanent Roof Anchor Brochure to review specifications, load ratings, and installation details.

Product size variations are listed below.

For project-specific guidance or system design support, contact our team.

Description

Features

  • Permanent adhesive wall anchor incorporating HSS reinforcement where additional structural support is required
  • Designed for retrofit conditions where access below the roof or concrete slab is restricted or unavailable
  • US configurations utilize HY-200A two-part epoxy with a specified minimum embedment of 5 inches
  • Multiple configurations accommodate combined wall and HSS post thicknesses ranging from 5 to 16 inches

System Details

Designed for reinforced wall anchorage on existing structures where an adhesive connection and supplemental HSS support are required.

Product Size Chart

Below is a chart of our standard sizes. More are available upon enquiry.

Model No. Anchor Height Total Wall Thickness (including HSS Post) Slab Thickness Min. Embed Depth Min. Wall Bolt Length Application Epoxy Type
FA-PB93SG-A4S-2408 20″ to 22″ 5-8″ 6″ 5″ 12″ For Ontario HVU Glue Capsule
FA-PB93SG-A4S-2412 20″ to 22″ 9-12″ 6″ 5″ 16″ For Ontario HVU Glue Capsule
FA-PB93SG-A4S-2416 20″ to 22″ 13-16″ 6″ 5″ 20″ For Ontario HVU Glue Capsule
FA-PB93SG-A4S1-2408 20″ to 22″ 5-8″ 6″ 5″ 12″ For US HY-200A 2 part epoxy
FA-PB93SG-A4S1-2412 20″ to 22″ 9-12″ 6″ 5″ 16″ For US HY-200A 2 part epoxy
FA-PB93SG-A4S1-2416 20″ to 22″ 13-16″ 6″ 5″ 20″ For US HY-200A 2 part epoxy