A200-Weld-Davit-Base

When are Roof Anchors and Davits Required for Window Washing?

Generally, roof anchors should be considered for window washing for any building over 3 storeys. This is because, water fed poles, ladders, or lifts aren’t typically used for servicing facades much taller than this. Roof anchors are also required when fall protection is needed on a roof.  When it comes to window washing, if the building cannot be serviced from …

Design Considerations for Fall Protection and Suspended Access Systems

Projects that require fall protection and/or suspended access can come in all shapes and sizes. We’ve worked on buildings as short as 2 levels to as tall as 99 levels. However, for each building maintenance solution, there are design considerations that must occur at the preliminary planning stage.AT PRO-BEL THERE’S NO PROJECT TOO SMALL OR TOO TALL; WE DO IT …

Why Are Horizontal Lifelines Important for Fall Protection?

Horizontal Lifelines (HLL’s) are our solutions to providing a complete fall restraint system without sacrificing mobility. When a worker is within 1.8m of a vertical drop – we call this a ‘fall hazard zone or restricted area’ – they are required by law to be tied off to an anchor point (OSHA 1926.502 and ANSI/IWCA 1-14.1). However, single point anchors …

Guide to Bosun’s Chair Systems (Rope Descent System)

Worker on a Bosun’s chair using suction cups to stabilize. Window Washing is often performed with either a bosun’s chair system (boatswain chair system) or suspended platform in conjunction with Pro-Bel rigging equipment (such as anchors, davits, outriggers, etc.). In OSHA, a bosun’s chair system is referred to as a Rope Descent System (RDS). Read on for a quick RDS guide …

Roof Rigging – Launching a Platform Explained

Roof Rigged Davit Systems are designed for buildings where ground rigging is not ideal. Sometimes, site conditions, particularly at lower levels, do not allow for a platform to be picked up from the ground. Roof conditions such as permanent equipment, parapet/screen wall height, building shape, and especially suspension height must all be taken into consideration when deciding between designing for …

pro-back

Fall Protection Systems – The Design Process

Window Washing Equipment and Fall Protection System design is a highly specialized area. At Pro-Bel, we have a design process to ensure your system meets state/provincial and national regulations. Our Design Service is also FREE. Some highly complicated projects may require a fee, or if you’d like a more detailed design. In order to begin designing your Fall Protection/Window Washing …

Prescient Building Structure and Window Washing Systems

Prescient is a company that designs and constructs buildings with a proprietary light gauge steel design.  They are a new company founded in 2012 in the US that over the past few years, has begun applying their construction methods on mid and high-rise buildings. Building with Prescient provides developers/owners with both savings in construction costs as well as shorter durations …